What is Corrosion Block?
Corrosion Block is an anti-corrosion compound
developed exclusively to stop existing corrosion and prevent
It is unique in that it is designed for use
in electrics and electronics as well as metals and structures.
this product essential for your day-to-day routine maintenance
and as long-term asset protection for your boat/equipment within
the harsh marine environment.
It is a VERY sophisticated water displacement
product designed as corrosion prevention and inhibiting compound
with the added advantage that it will stop existing corrosion,
prevent new forming and is slow to deteriorate (it has a 12 to
18 month active life). It is also a very efficient penetrant,
without loosening structural attachments and an excellent lubricant,
without having any wax, silicon or Teflon additives (which actually
seal in moisture thereby aggravating and perpetuating the corrosion
process). It is ‘pro-active’, neither passive nor
waxy, is compatible with most plastics and is EXTREMELY ECONOMICAL
What will it actually do?
It will, with regular applications, make maintenance
easier and save you money, make the boat/engine rigging etc.
easier to clean, look better, help prevent surface/structural/electrical
corrosion related failure thereby increasing reliability and
it will increase the boat’s value. It will significantly
reduce your replacement, repair and labour expenses. That’s
what it will actually do!
Block - In Brief
Corrosion Block is a proprietary package of
additives in a slightly thicker carrier than ACF-50.
package makes Corrosion Block into a high-adherence creeping-fluid
AND an outstanding de-watering fluid too. These properties
mean that just a smallest amount will get into every crevice,
blemish of corrosion, utterly remove the water and stay on
task, even under maritime conditions.
Removing water means stopping
corrosion dead in its tracks. With the extra adhesion Corrosion
Block stays in place for up to six-months, even in salt-spray,
actively spreading, sacrificing itself to keep corrosion at
Corrosion Block, the Facts!
- ‘ACTIVE’ long-lasting, ‘non-drying’
- Kills existing corrosion
- Prevents new corrosion from forming
- Excellent penetrant & lubricant
- Approved for engines & electronics
- Contains NO silicon, wax, resin, tar, asphalt
- NOT WATER SOLUBLE
- AS CLOSE TO ZERO CORROSION AS NATURE WILL
Where to use it
Corrosion Block is simply sprayed into the
structure, joints and welds, i.e. under hidden areas, where the corrosion
works away un-noticed,
under panels and on hidden parts of the engine, gear boxes, generators,
switch panels and avionics, especially on outboard engines where it
will work hard to prevent corrosion and structural degeneration. Where
corrosion is already evident it will help inhibit further progress
by insulating and electrically ‘switching off’ the corrosion
cell. It will also penetrate around bolts, screws and hardware, protecting
them from electrolytic corrosion and preventing seizure.
It will protect electrical joints, plugs and
components and prevent corrosion causing high resistance joints.
This goes for PCB’s
and electronics as well, such as computerised ignition and fuel control
units and their multi pin plugs, radio’s, radar and antenna’s,
while switches, controls and levers will all be lubricated as well
as protected from corrosion. It does not affect the working of electrical
or electronic components however keep it off LCD’s. Multi pin
plugs and connectors benefit from having Corrosion Block applied directly
to the contacts. Corrosion Block has restored many a failed electronic/electrical
component. It’s uses are unending, you will love it!
Marine Products Stockists
Additional Stockists required please contact
us for further details
CORROSION BLOCK IS THE PREFERRED CHOICE OF PROFESSIONALS THROUGHOUT