ACF-50, Anti-Corrosion Formula, is a state of the art,
anti-corrosion/lubricant compound, that has been specifically designed
for the Aerospace Industry.
ACF-50 can be described as an ultra thin fluid
film compound which must be applied on an annual basis. ACF-50 actively
penetrates through the corrosion deposits to the base of the cell where
it emulsifies and encapsulates the electrolyte, lifting it away from
the metal surface.
ACF-50 then dispels this moisture and provides an
atmospheric barrier which prevents any further moisture contact,
thereby keeping the cell inactive. This compound continues to actively
and "creep" into the tightest of seams, lap joints, micro
cracks and around rivet heads, dissipating the moisture, even salt
these corrosion prone areas.
These unique abilities of ACF-50 remain
effective for 12 months, gradually disappearing as it is chemically
What will it actually do?
Being ‘Pro Active’ about corrosion control
is the best way to protect your investment. Regular ACF-50 treatments
reduce maintenance costs and improve overall flight safety. The application
methods and specially designed equipment, deliver ACF-50’s penetrating
fog to all critical aircraft structure. Only ACF-50’s advanced
corrosion control properties, protect both airframe and avionics systems.
- Kills existing corrosion & prevents new
- 'ACTIVE' for up to 12 months
- Excellent lubricant & penetrant
- Approved for use on electrics & engines
- Easily applied non-drying, ultra thin, clear film
- Very economical
- Contains no wax, silicon, Teflon or water
- In Brief
ACF-50 is a light carrier with a proprietary package
of additives that transform it into an astonishing creeping-fluid AND
an outstanding de-watering fluid too. These properties mean that just
the smallest amount will get into every crevice, every blemish of corrosion,
and utterly remove the water. No water means no corrosion, period.
And that’s just the start of it. ACF-50 stays in place for up to
two years, actively spreading, sacrificing itself to keep corrosion at
FACTS ABOUT ACF-50
SPEC 81309 TYPE II AND III APPROVALS which means ACF-50 is approved for
ferrous and nonferrous metals, electrical
systems and electronic components.
- CHEMICALLY NEUTRALISES
corrosive environmental effects, including de-ice spray.
APPLIED non-drying, ultra-thin, clear film.
NO WATER,SILICON,TEFLON OR WAX no sticky build up, no risk
of existing corrosion being sealed in and no
risk of water remaining where it will cause corrosion and damage, even
- ‘ACTIVE’ which means that it ‘creeps’ and ‘keeps
- DOESN’T NEED REAPPLYING ACF-50 will
last up to 24 months, flight after flight after flight.
- 95% Product – a
little goes a long way - lasts ages.
- SAFE TO USE ANYWHERE
ON THE AIRCRAFT, FIXED OR ROTARY ideally misted into voids or
applied directly into electrical
joints and components where it will prevent corrosion induced failures.
THE ASTHETIC of the aircraft.
- LIGHT LUBRICANT & PENETRANT.
- All Year
Round SERVICE SPRAY.
- AS CLOSE TO ZERO CORROSION AS NATURE WILL